Author Archive

  • Simerics at iTECINDIA2023

    Simerics will be an exhibitor at SAEINDIA iTECINDIA2023. iTEC 2023 will be held between December 13-15, 2023 at Chennai Trade Center.

    Dr. Shyam Sundar Pasunurthi will have a presentation on the topic of “3D CFD Simulation of Oil Flow and Heat Transfer in an e-Drive Unit” at this conference.

    Visit us a booth #1140 to find out about our fast, reliable and accurate products! Simerics is looking forward to connecting with you and highlighting the latest developments in our software.

  • Simerics sponsors PTC Global Summit 2024

    CAD users, Simulation users, Creo users extend your knowledge and skills at the PTC Global Summit 2024 in Orlando, January 22 – 25! We will show easy to use advanced features in Creo Flow Analysis that will allow your companies to save hundreds of thousands of dollars in operating costs. Visit us at PTC Global Summit 2024! See you soon!

  • Orca3D Marine CFD revolutionizes Marine Design process

    Read a success story about the integration of CFD into marine design in the November issue of “Rhinozine” magazine. Traditionally using CFD was time consuming and complicated but with software like Orca3D Marine CFD, it has become easy, fast, reliable and allows for exploring new possibilities within a small office.

    More is available here.

    If you would like a quote, or would like to become a reseller, or would like a 15 day evaluation license for Rhino Flow-RT, please fill out the form here. If you have any questions, please email Rich Moore at rich.moore@simerics.com 

    Please post any models you create to https://discourse.mcneel.com/ 

    Thank You!

  • Simerics-MP CFD for Autodesk® Fusion 360®

    Simerics is excited to offer Simerics-MP CFD package now on Autodesk.

    Simerics-MP offers three variants designed for users of Autodesk® Fusion 360®.

    ·        Simerics-MP CFD has flow (internal, external, and a combination of both) and Thermal and Heat (conduction, convection). 

    ·        Simerics-MP CFD Plus adds Radiation, Moving/Sliding Mesh (rotating machinery, fans, blowers), Species and Particles (including erosion wear). 

    ·        Simerics-MP CFD Premium adds Multiphase, Cavitation, Multicomponent (gases of varying density) and Dynamics (fluids moving a solid).

    Fusion 360’s UI and models are used to make all of these physics functions together.  There are huge annual cost reductions when matching hardware prototypes in the quickest possible method.
    Note: To activate your 30-day evaluation license, please email rich.moore@simerics.com

    To learn more go here: Simerics-MP CFD. | Fusion 360 | Autodesk App Store

  • Webinar Series 2023

    Please join Simerics for free Webinar Series 2023.

     

    Webinar 2023_04: Optimization of Pumps using
    Simerics-MP/Simerics-MP+ Version 6.0
    Date: November 08th, 2023
    Day: Wednesday
    Time: 10:30-11:30 am EST

     

    Simerics is pleased to announce the new version of Simerics-MP/MP+® software. With this new release, there are several new modeling capabilities including, optimization (Simerics-OPT), noise modeling, improved Volume of Fluid (VOF) implementation, among others. In this webinar, we will delve deeper into the topic of optimization and show the easy utilization of Simerics-CFD and Simerics-OPT to optimize a centrifugal pump.

    Centrifugal pumps are very common place in multitude of industries and efficient operation of the pumps can be quite instrumental in the overall efficiency of the system as well as reduction of operation costs. Simerics-MP+, with the centrifugal pump template, automated meshing as well as rapid runtimes can provide very quick turnaround times for pump simulations.

    With the new version of Simerics, Version 6.0, all the advantages of Simerics-CFD is now accentuated with the addition of the optimizer (Simerics-OPT) all coupled inside the same GUI. With this addition, customers can now run the rapid fast CFD-OPT simulations to improve performance, head, efficiencies or any of their desired parameters all inside the Simerics GUI.

    For parameterization of the pump model, CF-Turbo, a pump designing tool is utilized to alter the design based on the optimization results and provide an updated design for Simerics-CFD and Simerics-OPT to analyze.

    We are pleased to announce this chapter of the webinar where we will delve into some of these
    uniqueness of Simerics-CFD and Simerics-OPT along with CF-Turbo.


    This webinar will cover:
    1.      A brief introduction to the new capabilities of Simerics-MP/Simerics-MP+ Version 6.0

    2.      Setup of optimization inside Simerics-OPT for a centrifugal pump

    3.      Baseline model setup in CF-Turbo

    4.      Optimization runs and results to showcase the ease and effectiveness of the approach

    5.      Provide a glimpse of aggressive designs obtained by the optimizer

      If you have any questions please email cs@simerics.com or dp@simerics.com

    Page 6 / 30